Interactive Workshop on Metal Casting Aluminum Material for Productive Teachers of SMK Negeri 1 Bukittinggi : Workshop Interaktif Metal Casting Material Alumnium bagi Guru Produktif  SMK Negeri 1 Bukittinggi

Zainal Abadi; Andri  Arafat; Arwizet K; Rifelino Rifelino

doi:10.57152/consen.v4i2.1792

Authors

Zainal Abadi Universitas Negeri Padang
Andri Arafat Universitas Negeri Padang
Arwizet K Universitas Negeri Padang
Rifelino Rifelino Universitas Negeri Padang

DOI:

https://doi.org/10.57152/consen.v4i2.1792

Keywords:

Aluminium, Crusible, Guru, Pengecoran logam, Workshop interaktif

Abstract

This technology is one of the technologies that is widely used in the industrial sector, especially large industries and the automotive industry. Automotive products, machine components and household appliances are widely made using this metal casting method. Metal casting is a technique in applying a product design or making machine products/components, motorbikes and others. Metal Casting Technology is something new for teachers at SMK Negeri 1 Bukittingi. This community service activity was initiated to upgrade teacher skills in understanding metal technology to teachers at Vocational High Schools so that the skills they have are more developed in designing 3-dimensional objects and realizing them in the form of real products. It is hoped that through the training given to teachers at SMK, they can stimulate creative ideas in drawing techniques using CAD software and realizing them in the form of automotive component products. This Metal Casting Workshop is also a Downstream of research that has been carried out with previous funding. Thus, this activity is very relevant to the research results and partner needs, so that the achievements and benefits generated, in addition, the service that will be carried out is also an official request from SMK Negeri 1 Bukittinggi. In general, the activity went smoothly and achieved the goals set in this community service activity

Downloads

Download data is not yet available.

References

J. V. Christy, R. Arunachalam, A. H. I. Mourad, P. K. Krishnan, S. Piya, and M. Al-Maharbi, “Processing, Properties, and Microstructure of Recycled Aluminum Alloy Composites Produced Through an Optimized Stir and Squeeze Casting Processes,” J Manuf Process, vol. 59, pp. 287–301, Nov. 2020, doi: 10.1016/j.jmapro.2020.09.067.

W. Liu et al., “Critical life cycle inventory for aluminum die casting: A lightweight-vehicle manufacturing enabling technology,” Appl Energy, vol. 304, Dec. 2021, doi: 10.1016/j.apenergy.2021.117814.

J. Gottmyers Melwyn, B. Chandragandhi, G. Sathiyaseelan, and P. Srinath, “Aluminium scrap recycling in a production furnace: Minimizing dross formation for sustainable and efficient recovery,” Mater Today Proc, May 2023, doi: 10.1016/j.matpr.2023.05.340.

M. Miftah (2013). Fungsi, dan Peran media Pembelajaran sebagai Upaya peningkatan Kemampuan Belajar Siswa. Kwangsan: jurnal Teknologi Pendidikan. Vol.1, No.2, pp.95-1-5.

L. Setiawan, N. S. Wardani, and T. I. Permana, “Peningkatan kreativitas siswa pada pembelajaran tematik menggunakan pendekatan project-based learning,” Jurnal Pembangunan Pendidikan: Fondasi dan Aplikasi, vol. 8, no. 1, Jun. 2021, doi: 10.21831/jppfa.v8i2.40574.

O.?: Muhammad, N. Ilyas, and A. Leman, “Pengembangan Tungku Pelebur (MN Ilyas dan Arianto LS) TUNGKU KRUSIBEL KOMPAK UNTUK PRAKTIK PENGECORAN ALUMINIUM DI SMK MUHAMMADIYAH 1 SALAM COMPACT CRUCIBLE FURNACE FOR ALUMINIUM CASTING PRACTICE AT MUHAMMADIYAH 1 SALAM VHS.”

A. S. Leman and dan Mujiyono, “PENGEMBANGAN TUNGKU PELEBURAN ALUMINIUM UNTUK MENGEMBANGKAN KOMPETENSI PENGECORAN DI SMK PROGRAM STUDI KEAHLIAN TEKNIK MESIN.”

R. Chandrasekaran, R. D. S. G. Campilho, and F. J. G. Silva, “Reduction of scrap percentage of cast parts by optimizing the process parameters,” in Procedia Manufacturing, Elsevier B.V., 2019, pp. 1050–1057. doi: 10.1016/j.promfg.2020.01.191.

W. T. Bhirawa, “PROSES PENGECORAN LOGAM DENGAN MENGGUNAKAN SAND CASTING.”

A. Suprihanto and Y. P. Umardani dan Wahyudi, “ANALISIS CACAT COR PADA PROSES PENGECORAN BURNER KOMPOR (STUDI KASUS DI PT. SUYUTI SIDO MAJU, CEPER).” [Online]. Available: http://ejournal.undip.ac.id/index.php/rotasi-27-

“113481-ID-analisis-pengaruh-model-sistem-saluran-d”.

“Analisis Perbandingan Model Cacat Coran Aladin | Achmad.”

M. H. Raza, A. Wasim, M. Sajid, and S. Hussain, “Investigating the effects of gating design on mechanical properties of aluminum alloy in sand casting process,” Journal of King Saud University - Engineering Sciences, vol. 33, no. 3, pp. 201–212, Mar. 2021, doi: 10.1016/j.jksues.2020.03.004.

A. A. Luo, A. K. Sachdev, and D. Apelian, “Alloy development and process innovations for light metals casting,” Aug. 01, 2022, Elsevier Ltd. doi: 10.1016/j.jmatprotec.2022.117606.